[design/2014/cvut-logo-en-blue.png]
CZ / EN

Department of Machining, Process Planning and Metrology

CZ   / EN  

People

Jan Šimota

Ing. Jan Šimota

jan.simota (at) fs.cvut.cz

(22 435) 2617

room: B1-113, Dejvice

Navigation

More informations available in external application. V3S.

Journal papers

2023

  • Energy-based method for analyzing fatigue properties of additively manufactured AlSi10Mg – Matušů, M. - Dimke, K. - Šimota, J. - Papuga, J. - Rosenthal, J. - Mára, V., - Beránek, L., Journal of Mechanical Science and Technology. 2023, 37(3), 1131-1137. ISSN 1738-494X.

2022

  • Influence of Stress Relief Annealing Parameters on Mechanical Properties and Decomposition of Eutectic Si Network of L-PBF Additive Manufactured Alloy AlSi10Mg – Růžičková, L. - Sobotová, J. - Beránek, L. - Pelikán, L., - Šimota, J., Metals — Open Access Metallurgy Journal. 2022, 12(9), 1-14. ISSN 2075-4701.
  • Laser polishing of additively manufactured 316L stainless steel with different construction angles – Primus, T. - Beránek, L. - Pitrmuc, Z. - Zeman, P., - Šimota, J., The International Journal of Advanced Manufacturing Technology. 2022, 121(5-6), 3215-3228. ISSN 0268-3768.
  • Impact Damage Detection of a Glass Fabric Composite Using Carbon Fiber Sensors with Regard to Mechanical Loading – Schmidová, N. - Macken, J. - Horoschnkoff, A. - Sedláček, R. - Kostroun, T. - Šimota, J., - Růžička, M., Applied Sciences. 2022, 2022(12), ISSN 2076-3417.
  • Mechanical and Microstructural Anisotropy of Laser Powder Bed Fusion 316L Stainless Steel – Pitrmuc, Z. - Šimota, J. - Beránek, L. - Mikeš, P. - Sommer, J. - Holešovský, F., - Andronov, V., Materials. 2022, 2022(15(2)), 1-21. ISSN 1996-1944.

2021

  • Analysis of strength properties of 3D printed lightweight structures made of AlSi10Mg material – Andronov, V. - Šimota, J. - Pelikán, L. - Beránek, L., - Novák, V., IOP Conference Series: Materials Science and Engineering. 2021, 1178 ISSN 1757-8981.
  • Optimization of Process Parameters for Additively Produced Tool Steel 1.2709 with a Layer Thickness of 100 μm – Andronov, V. - Šimota, J. - Beránek, L. - Blažek, J., - Rušar, F., Materials. 2021, 14(11), 1-23. ISSN 1996-1944.

2020

  • Use of Computed Tomography in Dimensional Quality Control and NDT – Beránek, L. - Kroisová, D. - Dvořáčková, Š. - Urban, J. - Šimota, J. - Andronov, V. - Pelikán, L., - Bureš, L., Manufacturing Technology. 2020, Vol.20(No.5), 566-575. ISSN 1213-2489.
  • Influence of CMM scanning speed and inspected feature size on an accuracy of size and form measurement – Urban, J. - Beránek, L. - Koptiš, M. - Šimota, J., - Košťák, O., Manufacturing Technology. 2020, 20(4), 538-544. ISSN 1213-2489.

2017

  • FOD Experimental Simulation and Analysis of Potential Benefits of Modified Blisk Geometry – Beránek, L. - Pitrmuc, Z., - Šimota, J., Manufacturing Technology. 2017, 17(3), ISSN 1213-2489.
  • FOD experimental simulation and analysis of potential benefits of modified blisk geometry – Beránek, L. - Pitrmuc, Z., - Šimota, J., Manufacturing Technology: Journal for Science, Research and Production. 2017, 17(3), 287-291. ISSN 1213-2489.

2016

  • Importance and Methods of Residual Stress Profile Measurement – Pitrmuc, Z. - Rázek, V. - Beránek, L. - Vrabec, M., - Šimota, J., Manufacturing Technology. 2016, 16(3), ISSN 1213-2489.
  • Importance and methods of residual stress profile measurement – Pitrmuc, Z. - Beránek, L. - Rázek, V. - Vrabec, M., - Šimota, J., Manufacturing Technology. 2016, 2016(3), 590-595. ISSN 1213-2489.

Proceeding papers

2024

  • Dissipative energy as a fatigue parameter of additively manufactured AlSi10Mg samples – Matušů, M. - Papuga, J. - Rosenthal, J. - Šimota, J. - Beránek, L. - Bumba, F. - Rodriguez da Costa, P., - Reis, L., In: Procedia Structural Integrity. Brussels: Elsevier Science, 2024. p. 29-36. vol. 53. ISSN 2452-3216.

2023

  • The effect of various heat treatments on fatigue life of additively manufactured specimens from AlSi10Mg – Matušů, M. - Šimota, J. - Papuga, J. - Rosenthal, J. - Beránek, L., - Džuberová, L., In: Proceedings of the 44th International Conference on Materials Mechanics. TU DARMSTADT, 2023. p. 103-109. ISBN 978-3-939195-74-0.

2021

  • The evaluation of Ti–25Nb–8Ta–5Sn alloy prepared by 3D printing – Krčil, J. - Mára, V., - Šimota, J., In: 15. konference Přínos metalografie pro řešení výrobních problémů. Praha: Czech Technical University in Prague, 2021. p. 44-49. ISBN 978-80-01-06883-0.

2020

  • EVALUATION OF DIMENSIONAL AND SURFACE QUALITY OF A PART PRODUCED BY THE DMLS METHOD AFTER MACHINING – Pelikán, L. - Andronov, V. - Beránek, L. - Šimota, J., - Pitrmuc, Z., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 113-120. ISBN 978-80-87583-32-6.
  • VERIFICATION OF THE ACCURACY OF METALLIC 3D PRINTING ON A BENCHMARK ARTIFACT MADE OF ALSI10MG POWDER – Andronov, V. - Pelikán, L. - Beránek, L. - Šimota, J., - Pitrmuc, Z., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 14-20. ISBN 978-80-87583-32-6.
  • ANALYSIS OF TOOL STEEL 1.2709 PRODUCED BY METALLIC 3D PRINTING – Andronov, V. - Pitrmuc, Z. - Pelikán, L. - Beránek, L., - Šimota, J., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 7-13. ISBN 978-80-87583-32-6.

2019

  • Creep feed grinding optimization – Šimota, J. - Pitrmuc, Z. - Štajnochr, L., - Beránek, L., In: Technological forum 2019 Book of proceeding. Jaroměř: Kudláček Jan, Ing., 2019. p. 138-142. first. ISBN 978-80-87583-30-2.
  • Influence of setting up of scanning speed of tactile probing CMM systems on the final measurement process capability – Urban, J. - Beránek, L. - Košťák, O. - Šimota, J., - Dvořák, R., In: Technological forum 2019 Book of proceeding. Jaroměř: Kudláček Jan, Ing., 2019. p. 165-169. first. ISBN 978-80-87583-30-2.
  • Precision and dimensional limits analysis of aluminium alloy artifacts produced on DMLS machine Concept laser M2 cusing – Pelikán, L. - Andronov, V. - Beránek, L. - Šimota, J. - Pitrmuc, Z., - Urban, J., In: TECHNOLOGICAL FORUM 2019. Jaroměř: Ing. Jan Kudláček, 2019. p. 109-115. ISBN 978-80-87583-30-2.

2018

  • Utilization of new modified materials in creep-feed grinding – Šimota, J. - Pitrmuc, Z. - Urban, J., - Holešovský, F., In: Konference studentské tvůrčí činnosti. ČVUT v Praze, fakulta strojní, 2018. ISBN 978-80-01-06421-4.
  • Monitoring des technischen Standes der Maschinen auf Basis der Datenkontrolle der Komponentenqualität – Urban, J. - Beránek, L., - Šimota, J., In: Konference studentské tvůrčí činnosti. ČVUT v Praze, fakulta strojní, 2018. ISBN 978-80-01-06421-4.

2017

  • Application of Reverse Engineering Technology – Koptiš, M. - Urban, J. - Beránek, L. - Šimota, J., - Mikeš, P., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. ISBN 978-80-87583-22-7.
  • Investigation on residual stress profiles and microhardness on Ti6Al4V alloy – Pitrmuc, Z. - Savinov, A. - Šimota, J. - Beránek, L., - Rázek, V., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. pp. 106-110. ISBN 978-80-87583-22-7.
  • Influence of process parameters and part orientation on mechanical properties for DMLS manufactured Stainless steel AISI 316L – Pitrmuc, Z. - Šimota, J. - Beránek, L., - Urban, J., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • Anisotropy of parts produced using DMLS technology – Šimota, J. - Pitrmuc, Z. - Urban, J., - Beránek, L., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • Technological possibilities of control of bevel gears on the CMM – Urban, J. - Tillinger, K - Beránek, L. - Šimota, J. - Koptiš, M., - Mikeš, P., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. pp. 161-165. ISBN 978-80-87583-22-7.
  • Evaluation of mechanical properties manufactured parts by DMLS technology – Šimota, J. - Pitrmuc, Z. - Urban, J., - Koptiš, M., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. pp. 127-132. ISBN 978-80-87583-22-7.
  • Optimierung der Qualitätskontrolle bei Koordinatenmessgeräten hinsichtlich der Messproduktivität – Urban, J. - Dvořák, R. - Beránek, L. - Šimota, J. - Mikeš, P., - Tillinger, K., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.

2016

  • Influence of Cutting Conditions on Surface Integrity after Progressive Grinding of Blade Roots from Inconel 713LC – Čapek, J. - Kolařík, K. - Pitrmuc, Z. - Ganev, N. - Beránek, L. - Trojan, K. - Kyncl, J., - Šimota, J., In: Experimental Stresss Analysis 2016. Plzeň: Západočeská universita, Fakulta aplikovaných věd, 2016. ISBN 978-80-261-0624-1.

Patents, utility designs, industrial designs

2017

  • Přípravek pro upínání lopatek pro letecký a energetický průmysl na rovinné brusky – Beránek, L. - Kyncl, J. - Pitrmuc, Z. - Šimota, J., - Vyskočil, Z., Czechia. Utility Model CZ 30673. 2017-05-15.

Prototype, samples

2020

  • Respirační filtr pro ochranné masky a polomasky – Pelikán, L. - Beránek, L. - Šimota, J., - Andronov, V., [Functional Sample] 2020.

2018

  • Technologie dělení kontinuálního pásma materiálu – Štajnochr, L. - Beránek, L. - Kyncl, J. - Kellner, T. - Šimota, J., - Kyncl, M., [Functional Sample] 2018.

Report

2019

  • Odborná zpráva o řešení projektu FV10151 za rok 2019 – Beránek, L. - Kyncl, J. - Kellner, T. - Kyncl, M. - Štajnochr, L. - Mádl, J. - Šimota, J. - Urban, J. - Pelikán, L. - Sommer, J. - Koptiš, M. - Kyncl, J. - Kovaříková, M., - Komárek, T., [Research Report] 2019.

2018

  • Zpráva o postupu prací a dosažených výsledcích za rok 2018 – Pitrmuc, Z. - Beránek, L. - Rázek, V. - Šimota, J., - Pala, Z., [Research Report] 2018.
  • Odborná zpráva o průběhu projektu za rok 2018 – Pitrmuc, Z. - Kellner, T. - Urban, J. - Šimota, J. - Sommer, J. - Pelikán, L., - Andronov, V., [Research Report] 2018.
  • Odborná zpráva o řešení projektu FV10151 za rok 2018 – Beránek, L. - Kyncl, J. - Kellner, T. - Kyncl, M. - Štajnochr, L. - Šimota, J. - Urban, J. - Pelikán, L. - Slaný, M. - Sommer, J. - Koptiš, M., - Kyncl, J., [Research Report] 2018.

2017

  • Zpráva o postupu prací a dosažených výsledcích za rok 2017 – Pitrmuc, Z. - Beránek, L. - Šimota, J. - Mikeš, P. - Pala, Z., - Rázek, V., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017. Report no. TH01011405-PZ-2017.
  • Odborná zpráva o řešení projektu FV10151 za rok 2017 – Beránek, L. - Kyncl, J. - Kellner, T. - Kyncl, M. - Štajnochr, L. - Šimota, J. - Urban, J. - Pelikán, L. - Slaný, M. - Sommer, J. - Koptiš, M., - Kyncl, J., [Research Report] Velké Opatovice: P-D Refractories CZ a.s., 2017.
  • Odborná zpráva o průběhu projektu za rok 2017 – Pitrmuc, Z. - Šimota, J. - Urban, J. - Pelikán, L. - Slaný, M. - Kellner, T. - Rajal, J., - Savinov, A., [Research Report] 2017.

2016

  • Návrh konstrukce brusky pro obrábění skla a výroba dílčích součástí – Beránek, L. - Novák, P. - Šimota, J. - Štajnochr, L., - Urban, J., [Research Report] Praha 4: Mikronex, 2016.
  • Vývoj automatizovaných procesů kontroly kvality s využitím souřadnicových měřicích strojů – Beránek, L. - Mikeš, P. - Šimota, J. - Urban, J., - Šulc, V., [Research Report] Carl Zeiss spol. s r.o., 2016.
  • Odborná zpráva o průběhu projektu za rok 2016 – Kyncl, J. - Brajer, J. - Mašek, P. - Šimota, J. - Urban, J. - Kellner, T., - Pitrmuc, Z., [Research Report] 2016.
  • Odborná zpráva o řešení projektu FV10151 za rok 2016 – Beránek, L. - Kyncl, J. - Kellner, T. - Kyncl, M. - Šimota, J., - Kyncl, J, [Research Report] Velké Opatovice: P-D Refractories CZ a.s., 2016.

2015

  • Návrh konstrukce brusky a výroba dílcích součástí – Urban, J. - Beránek, L. - Novák, P., - Šimota, J., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2015.

Book chapters

2022

  • The Evaluation of Ti-24Nb-8Ta-4Sn Alloy Prepared by 3D Printing – Krčil, J. - Mára, V., - Šimota, J., In: Solid State Phenomena Vol. 334. Pfaffikon: Trans Tech Publications Ltd., 2022. p. 43-48. vol. 334. ISSN 1662-9779. ISBN 978-3-0364-1106-4.

Organisation of a conference, workshop, exhibition

2021

  • 3D tisk v technice – Pelikán, L. org. - Šimota, J. org., [Workshop Hosting] 2021.

Trial runs, verified technologie, variety, breed

2017

  • REPAIR INTRO TO H80 COMPRESSOR AIRFOILS – Pitrmuc, Z. - Beránek, L. - Šimota, J. - Stawarz, S. - Lorek, M. - Pala, Z. - Gergely, V., - Bouchaud, B., [Verified Technology] 2017.

2016

  • Silové broušení tvarových ploch superslitin – Pitrmuc, Z. - Šimota, J. - Beránek, L. - Kyncl, J., - Vyskočil, Z, [Verified Technology] 2016.

Invited unpublished lecture

2019

  • Aditivní výroba kovových součástí – Šimota, J., [Invited unpublished scientific lecture] Praha: Asociace strojních inženýrů a S-klub fakulty strojní ČVUT. 2019-04-02.

Other unsorted

2019

  • Machining of shaped surfaces on workpieces produced by DMLS – Pelikán, L. - Pitrmuc, Z. - Šimota, J. - Slaný, M. - Sommer, J. - Andronov, V., - Beránek, L., Manufacturing Technology: Journal for Science, Research and Production. 2019, ISSN 1213-2489.